SEM PHTS108 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 47

SEM PHTS108 Скачать руководство пользователя страница 23

A2538-003/01 March 2020

SEMCO Proprietary Information

17

Note  that  this  data  has  a  Frame  Sync  Pattern  of  FF6B2840  hex  that  has  been  highlighted  in
yellow,  followed  by  a  frame  counter (00 03)  highlighted  in  green.  This  is  the  exact  data  that  will  be
transmitted  by  the  PHTS108. There is no extra information, such as formatting or headers, in this file.

Every  byte  contained  in  the  file  will  be  uploaded  to  the  PHTS108  RAM  for  playback.  Bits  will  be
transmitted in the order that  the bytes are stored in the file, with each byte’s Most-Significant Bit (MSB)
transmitted out first.

For example: If a File started with following hexadecimal bytes:

1st byte

2nd byte

3rd byte

4th byte

5th byte

01

02

FF

AA

55

The bit stream would be:

0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1

Note:

Files  must  be  a  multiple  of  32  bits  (4  Bytes). If  they  are
not,  the  playback  will  be  padded  with  zeros  to  fill  up
to  the  next  multiple  of  32-bits. The  maximum  number  of
bytes  is  125MB  (1,000,000,000 bits).

3.2.3.1

Chapter 10 File Playback

Previously recorded Chapter 10 data can be used as a modulation source in the PHTS108 File Playback
mode. However, a Chapter 10 data file is not a

Flat Binary File

. Chapter 10 data contains information

that instructs a recorder on how to play the data back. Chapter 10 file format can also contain multiple
streams of  data.

Using  a  Chapter  10  data  file  as  a  data  source  for  the  PHTS108  requires  the  use  of  software  to
convert  the Chapter 10 data file to a

Flat Binary File

. This conversion can be readily accomplished using

software  that  has  been  developed  by  Wideband  Systems,  a Digital Telemetry Recorder company  that
provides for recording that  data  in  Chapter  10  format.

This  software  is  available  through  SEMCO  and  has  been  provided  to  PHTS108  users  who  desire  to
convert  recorded  Chapter  10  data  files  into

Flat Binary Files

and use this data as a modulation

source in the PHTS108

File Playback

mode. Contact SEMCO if a copy of this software is required.

The procedure for converting a recorded Chapter 10 data channel to a

Flat Binary File

using Wideband

Systems’ software is as follows:

Step 1

- Load the Chapter 10 file and the Wideband Systems’ software via any USB media, and launch

the Wideband Systems software, which will provide the GUI as shown in Figure 3-14.

Step 2

- Using the file menu, select the desired Chapter 10 file as shown in Figures 3-15 and 3-16.

Step 3

- The Chapter 10

Summary

information can be viewed using the view tab shown in Figure

3-17.

«
...
21
22
23
24
25
...
»

Содержание PHTS108
















































Отзывы:

Нет отзывов