SEM PHTS108 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 47

SEM PHTS108 Скачать руководство пользователя страница 2

A2538-003/01 March 2020

SEMCO Proprietary Information

SAFETY SUMMARY

System Weight and Handling Restrictions -

Depending upon the specific system and configuration,

each  PHTS108  chassis  weighs  approximately  10  pounds  without  battery  and  <15  lbs  with  battery
installed.  The PHTS108 is  housed  in  a ruggedized  enclosure designed for handling and operation  by
one person.  A ruggedized carrying case for transporting and storage is provided for the PHTS108 and all
accessories.

Electrical –

The PHTS108 is designed to operate on 12 VDC battery power as well as 115/230

VAC  50/60  Hz,  and  complies  with  all  U.S.  and  International  safety  codes  and  regulations  required
for  safe  operation and use of commercial equipment.  Use standard and accepted safety practices with
respect to  operating commercial electrical equipment at all times to avoid the risk of personal injury or
death.

EMI/EMC

– The PHTS108 complies with all FCC and CE regulations regarding electromagnetic

interference and compatibility. There are no personnel hazards or safety issues with respect to EMI/EMC
when operating the system.

Exposure to Radio Frequency (RF) Signals –

The PHTS108 is designed to transmit RF signals

from 1435.5 MHz to 5250 MHz at levels of +5 dBm to -100 dBm. These signal levels are well below
the minimum safe exposure levels prescribed by both U.S. and International standards.

There  are  high  power  (+20 dBm, +30 dBm and +37  dBm)  output  options  available.  When  a high power
option  is  installed,  all  safety  practices  and  procedures  in  place  at  the  user  location  applicable to
protection from  RF  signal  exposure  at these levels must be followed.

«
1
2
3
4
...
»

Содержание PHTS108
















































Отзывы:

Нет отзывов