SEM 2226 Series, Руководство по эксплуатации и обслуживанию

Страница: 8 / 16

SEM Paper Shredders Operator Manual
4 SEM | www.semshred.com
Operation
When the unit is plugged in and the oiler is primed (if applicable), the machine is ready
for use. Press the
POWER button to turn on the machine. If the green light is on, the
machine is now ready for operation.
SEM paper shredders will automatically start running when paper is inserted and
detected by the photo eyes sensor.
The machine can be switched off at any time by pressing the POWER button for two
seconds. The green POWER LED control light will turn off. No power is consumed
when the machine is off.
Note:
All machines have an Electronic Capacity Control (ECC) display which indicates
the current sheet capacity during the shredding process. Each shredder has its own
feed rate and will either show green (A), yellow (B), or red (C) LED lights.
If the ECC lights are green,
an acceptable amount of
paper is being fed. Continue
feeding at this speed.
If the ECC lights are yellow,
the machine is beginning to
hit its limits. Try reducing the
feed rate.
If the ECC lights are red, too
much material is being fed.
The unit will reverse for a few
seconds to prevent a jam.
A.
B.
C.