EN
51
Technical data/General declaration of conformity
6. Technical data
Series
Torque
Nm
Rotation speed
Rpm
Power Input
A
Output
1/10
10
15
0.5
115
2/7
7
17
0.41
95
2/10
10
17
0.55
124
2/15
15
17
0.66
152
2/20
20
17
0.75
172
2/30
30
17
0.95
220
Installation location:
After installing the drive, mark the drive type in the technical data table and make a note of
the installation location.
Not all motor types are available in all series and torques. Series 2 motors have a plugin con-
nection cable. Series 2 motors have a plug in connection cable. Series 1 and series 3 motors
have a 2.5 m mains cable as standard which is permanently installed and cannot be replaced.
The relevant cable lengths and qualities for series 1, series 2 and series 3 can be selec ted in
the catalogue.
Connection cables must be ordered separately.
Information about connections using special connectors must be requested.
Information for all motor types:
Nominal voltage: 230 V AC/50 Hz
Standby consumption: 0.5 W
Safety class: IP 44
Operating time: 4 min.
Radio frequency: 868.1 MHz
Max. transmission output: 10 mW
Note: The maximum radio range is up to 25 m indoors and up to 350 m in the open field.
Subject to change without prior notice!
7. General declaration of conformity
SELVE GmbH & CO. KG company, hereby declares that the SEE-com is in con formity
with the basic requirements and other relevant provisions of the Directive 2006/42/EG,
2014/53/EU, 2014/30/EU and 2011/65/EU. The declaration of conformity can be looked up at
www.selve.de
