44
commeo initial operation/Setting by radio
If multiple receivers have been found, the selected receiver can be changed by pressing the
SELECT button for 1 second. The next receiver will perform a brief con firmation run. Only one
receiver can be selected at one time for moving, setting and programming.
SELECT 3 s
Power interruption/
programmed transmitter
SELECT mode
SELECT 1 s
SELECT 1 s
SELECT 1 s
SELECT 1 s
Receiver 3
Receiver 2
Receiver X
Receiver 1
Exit SELECT mode
3 s
To exit SELECT mode (the status LED will flash slowly in orange), press the SELECT
button for 3 seconds.
Status LED indicator on the transmitter for the various operating modes
Transmitter mode
Indicator on status LED
Operating mode
Lights up when a button is pressed
SELECT mode
Flashes slowly in orange
CONFIGURATION mode
(only for authorised qualified personnel),
see 5.2.7.
Flashes slowly in green or red
