
6
Instructions for use and settings
Upon connection to the controller, the signal light for the
controller starts to flash orange.
Once the connection to the controller is established, signal light
for the controller will light green.
SELTRONHOME PLATFORM DESCRIPTION
SETUP CONNECTION WITH THE CONTROLLER
Upon
connection to the supply voltage
(at first start or after a
reset), the WPS button will light green and all signal lights will
light
orange
.
Communication module GWD is connected to the heating controller via a wire (BUS) con-
nection. The GWD connects in to the internet via the Wi-Fi router, through which it com-
municates with the SeltronHome cloud services. SeltronHome service is a link between
the communication with the mobile app Clausius. Clausius sends commands and data,
obtained through SeltronHome services.
Before you start using the communication module GWD it is necessary:
- to mount the module on the wall,
- connect it to a Seltron controller,
- connect it to a supply voltage.
You can find technical instructions on pages 12 and 13.
Electrical connection of the device must be carried out by a qualified installer or
authorized organization.
SETUP COMMUNICATION MODULE GWD
Содержание GWD2
Страница 2: ......
Страница 19: ...19 Notes NOTES...