Seltron ACD20, Инструкция по эксплуатации

Страница: 9 / 52

| 9 Instructions for use
EN
STEP 6: SETTING THE UPPER LIMIT FOR THE REQUESTED
HEATING TEMPERATURE
With the buttons and you can set up the upper
limit of the requested temperature in heating mode.
Confirm the setup by pressing
.
If you have accidentally set the wrong upper limit, you can
return to the upper limit setting by pressing
.
STEP 7: SETTING THE REQUESTED HEATING TEMPERATURE
With the buttons and you can set up the requested
temp. in heating mode. Confirm the setup by pressing .
If you have accidentally set the wrong requested
temperature, you can return to the requested temperature
setting by pressing
.
For schemes with stand-pipe control, the supply temperature symbol
is displayed.
STEP 5: SETTING THE LOWER LIMIT FOR THE REQUESTED
HEATING TEMPERATURE
With the buttons and you can set up the lower
limit of the requested temperature in heating mode.
Confirm the setup by pressing
.
If you have accidentally set the wrong lower limit, you
can return to the lower limit setting by pressing
.
INITIAL CONTROLLER SETUP
Later, you can change the lower limit setting of the
requested heating temperature with the service
parameter S2.1.
Later, you can change the upper limit setting of the
requested heating temperature with the service
parameter S2.2.
Later, you can change the requested heating
temperature in the "Requested temperatures"
menu.