Seltron ACD20, Инструкция по эксплуатации

Страница: 10 / 52

10 | Instructions for use
EN
STEP 8: SETTING THE LOWER LIMIT FOR THE REQUESTED
COOLING TEMPERATURE
With the buttons and you can set up the lower
limit of the requested temperature in cooling mode.
Confirm the setup by pressing
.
If you have accidentally set the wrong lower limit,
you can return to the lower limit setting by pressing
.
STEP 9: SETTING THE UPPER LIMIT FOR THE REQUESTED
COOLING TEMPERATURE
With the buttons and you can set up the upper
limit of the requested temperature in cooling mode.
Confirm the setup by pressing
.
If you have accidentally set the wrong upper limit, you
can return to the upper limit setting by pressing
.
STEP 10: SETTING THE REQUESTED COOLING TEMPERATURE
With the buttons and you can set up the
requested temperature in heating mode.
Confirm the setup by pressing
.
If you have accidentally set the wrong requested
temperature, you can return to the requested
temperature setting by pressing
.
For schemes with stand-pipe control, the supply temperature symbol
is displayed.
INITIAL CONTROLLER SETUP
Later, you can change the lower limit setting of the
requested cooling temperature with the service
parameter S2.3.
Later, you can change the upper limit setting of
the requested cooling temperature with the service
parameter S2.4.
Later, you can change the requested cooling
temperature can be later changed in the
"Requested temperatures" menu.