DT-E 1.4: SUN PROTECTION SCREEN – VENETIAN BLINDS Z90
Issue 2 / April 2017 / EN
page 12 / 58
3.
Install the brackets and cover panel and end caps if
added to wall or niche with appropriate fixing system.
4.
Install tightly main brackets to the wall/ceiling.
Img. 3
5.
Check the level of installed cover panels and brackets,
correct if necessary. Appropriate leveling of the product
is necessary for its correct functioning.
Img. 4
6.
Loosen the screw of elastic bracket so that it is easy to
open.
7.
Connect installation cable to the bundle and open about
30 cm of the blind to enable the installation.
Img. 5
8.
Put the head rail with bundle into the open brackets, so
that the label „strona od okna” faces the window.
9.
Close the elastic bracket and secure the screws.
Img. 6
