SELFSAT SELFSAT-IPD30A, Руководство пользователя

Страница: 7 / 32

ENGLISH - 7
2. SAT>IP Wi-Fi Dongle preparation
①
②
Plug SAT>IP Wi-Fi Dongle direct into HDMI port of TV/monitor or
using HDMI extension cable.
Connect SAT>IP Wi-Fi Dongle and TV/monitor using USB power
cable. If TV/monitor does not have USB port to supply power,
connect SAT>IP Wi-Fi Dongle to wall socket using USB power cable
and power adaptor included. See below.
③
Make sure that required equipment and AP’s network ID/password
are prepared to add SAT>IP Wi-Fi Dongle to the Wi-Fi network. W-Fi
AP must be the one connected from SELFSAT>IP antenna which is
pointing the satellite.
√
√
√
In case TV/monitor outputs below than 1A(1,000mA), an
operation may not be smooth due to lack of power.
Use HDMI extension cable is recommended instead of direct
connection between SAT>IP Wi-Fi Dongle and TV/monitor .
Parts’ name and location may differ from stated in this manual.
• SAT>IP Wi-Fi Dongle set up
Example
①, ②
USB
HDMI
USB
HDMI