SELFSAT SELFSAT-IPD30A, Руководство пользователя

Страница: 15 / 32

ENGLISH - 15
①
②
③
Restart SAT>IP server
or Check the connection of SAT>IP server and Wi-Fi AP
or Check the Wi-Fi connection of SAT>IP Wi-Fi Dongle
• No HDMI ports at TV/monitor
–
–
Additional purchase of HDMI to RGB(analog) converter is required to
use the device.
Converter with external power supply port is recommended for
stable operation.
–
–
–
Check if the power of the device is properly connected.
Check the HDMI is properly plugged and TV’s external input is
arranged to HDMI.
Check the status of Wi-Fi at main screen. If signal is weak, get rid of
blockage between Wi-Fi AP and SAT>IP Wi-Fi Dongle and place
them closer.
• Problem with SAT>IP broadcasting reception
– Press red key to check the name and status of connected SAT>IP
server. If desire one is not found,
– If there is no issue from the above, go to “Setting” >”Set up system” >
SAT>IP Configuration to default” and then restart.
7. Common Q & A
Wi-Fi signal
strength
Wi-Fi AP’s name
• Contents is not playing or TV/monitor is flashing or “No signal”
is shown