SELFSAT SELFSAT-IPD30A, Руководство пользователя

Страница: 11 / 32

ENGLISH - 11
5. SAT>IP Wi-Fi Dongle settings
①
Phone to TV/SlideShow mode :
Change mode from “Router” to “Direct” if Wi-Fi AP is not available.
②
TV remote control supported HDMI-CEC :
Turn on for SAT>IP Wi-Fi Dongle controlling with TV remote control.
This is only available at TV/monitor supports controlling function of
HDMI connected device.
③
Alarm of the different devices :
Turn on for a notice of Qualcomm’s Alljoin based device is connected.
④
Alarm of the latest firmware update :
Turn on for a notice of the latest F/W released.
⑤
New firmware not be found / New firmware found on the system :
If there is new latest firmware released. UPDATE button on the right is
activated. Click “UPDATE” to update the latest firmware.
⑥
Reset your SAT>IP configuration to default :
Reset stored configurations and channel information back to default.
⑦
Reset your SAT>IP Dongle to factory settings :
To setup the device as manufactured from a factory. This makes
Bluetooth remote control & Wi-Fi AP connection and SAT>IP channel
information will be deleted. New connection process is required.
Set and change options of the device .
Setting
Select desire Wi-Fi for initial connection or change to a new.
• Set up Wi-Fi :
Scan/pair with available Bluetooth device.
• Set up Bluetooth :
Adjust the screen size using up/down/left/right buttons. • Adjust Screen :
Change background of main screen.
• Change Image :
Change default program when booting. • Startup Program :
• Set up System :