Selectronic SP PRO, Инструкция по эксплуатации

Страница: 9 / 76

INTRODUCTION | Product Overview
Doc #OI0003 Part #004122 Rev19 2014
|
9
of day, battery SoC or load demands allowing the maximum use of the renewable energy (such as PV solar)
and stored battery energy to supply loads to take advantage of variable electricity tariffs. A Solar Hybrid
system will allow the user to only use grid electricity when they choose.
By using the optional “Grid fail - Gen backup” module the SP PRO can be configured to automatically start
and stop a generator during a prolonged power outage. When the generator is running, the SP PRO will use
the generator to power the site load plus use any additional generator capacity to charge the batteries.
Off Grid Stand Alone Power Systems (SPS)
The SP PRO is the heart of the power system. It quietly provides AC power from the battery bank and
renewable sources. By using SP LINK the SP PRO can be configured to monitor battery state of charge
and load conditions to automatically start and stop the generator as required to charge the batteries and
supply loads heavier than the SP PRO can efficiently handle. These features, when correctly configured, will
increase the battery life and reduce generator running costs.
When the generator is running, the SP PRO will use the generator to power the site load; plus use any
additional generator capacity to charge the batteries. When the site loads are greater than the generators
output, the SP PRO will add its power to the generator. When the site loads are reduced, the SP PRO will
return to battery charging. The above operation happens automatically, whilst always maintaining “no
break” power to the site.
An SP PRO managed AC Coupled system is suitable for Off Grid systems due to the superior battery
charging functions that are achieved by a sophisticated system control and monitoring communications link
between the SP PRO and compatible grid inverters.
Mobile Systems
The SP PRO can support either an on board generator (Primary AC Source) or shore power(Alternate AC
Source). Both input power levels can be configured into the SP PRO and selected with an external switch.