SP LINK | Using SP LINK
Doc #OI0003 Part #004122 Rev 04 2010
|
93
DC TOTALS
This panel is a summary of today’s totals of inputs and outputs through your
battery pack.
dC e
nerGy
i
n
is compared to
dC e
nerGy
O
ut
to arrive at
dC e
nerGy
n
et
and the results are recorded in kW hours.
DC Inverter Energy is a total of the work the inverter has done, whether that is
supplying a load or charging.
If you wish to monitor the day to day performance of your system Time That Float
Was Achieved Today can be compared with yesterdays in the DC HISTORY tab.
This can be a handy comparative reading. You can record daily how long it takes
your system to replenish the previous days usage.
AC TOTALS
This is also a summary page, but this time of the AC kW hours through the
system.
aC L
Oad
e
nerGy
records the total power consumption by your site during that
day.
aC i
nput
e
nerGy
shows the total contribution by your generator or the mains grid,
while
H
OurS
OF
aC i
nput
records the running time of your generator or the length
of time the mains grid was connected to your SP PRO.
i
nVerter
r
un
t
iMe
is the length of time the inverter has run today – this should be
all the time unless you have programmed in an Inverter Lockout period.
In grid connected systems
e
xpOrt
e
nerGy
is the total power your system has
contributed to the mains grid in that day.
DC PEAK
This screen records the peak power level that has passed through the shunt(s)
that day. Not Applicable means the shunt isn’t configured for measuring
renewable.
Today Tab
The TODAY tab gives you data about your system for the current day.
