
8
© Selecto, Inc.
DIRECTIONS TO REVERSE WATER FLOW
NOTE:
Not recommended, unless necessary
EXCHANGE PROCEDURES
See below diagram. Begin by pulling out the blue clips on either side. Proceed to remove the 4 fittings (two from
each end) and exchange with the opposite end. Properly install all fittings back on the filter head. If using hard
copper piping, use the same technique from pages 4 and 5 (ref. Steps 2-7). If using rigid plastic piping, use the same
technique from pages 6 and 7 (ref. Steps 2-7).
Plug
300-715
Plug
300-715
Filtered Outlet
300-720
Filtered Outlet
300-720
Tap Inlet
300-714
Tap Inlet
300-714
(Reversal of water flow path from right to left completed)
(How to reverse the water flow direction)
Pressure Relief
300-738
Pressure Relief
300-738