2
© Selecto, Inc.
OPTIONAL PARTS LIST
PACKAGE CONTENTS
Twin Head Assembled #:
300-778HD
Pressure Gauge #:
300-023FA
Plastic 3/4” Shut-Off Valve #:
300-743
Inlet Fitting 3/4” #:
300-714
Outlet Fitting 3/4” #:
300-720
Pressure Relief Valve #:
300-738
3/4” Plug #:
300-715
Blue Retaining Clip #:
300-708E
Plastic Housing (Comes Assembled)
1 Filtration Cartridges
Spare Parts Kit (1 Lubricant Pack, 2 Clips, 2 O-Rings, 1
Inlet, 1 Outlet)
Instructions/Assembly Use and Care Manual
GENERAL NOTES
WARNING
It is important to ensure that you are in compliance with all applicable state and
local plumbing codes before you start installation of this product. Use of a licensed
technician for installation is recommended. All steps provided throughout are for
the typical installation only.
1)
Read and understand all of the instructions before attempting to install and operate this equipment.
Failure to do so may result in injury and damage to person and/or property.
2)
Prior to installation, shut off the water.
3)
It is important to ensure the mounting to the wall is strong enough to bear the water weight
of the product.
4)
Do NOT install system direct to the sunlight or freezing environment.
5)
When working with hard copper piping, keep all heat sources at least 18” away from plastic
components. The plastic components can be damaged by heat from the torch which may be used in
the installation.
6)
After installation, check all connections for leaks before operating the unit.
7)
Refer to the Installation Procedures to ensure that all clips are in the right position before
operating the unit.
THANK YOU FOR PURCHASING OUR PRODUCT
Everyone here at Selecto, Inc. would like to thank you for your support and
continued use of our products. We believe everyone should have access to safe,
clean water. Your purchase is a small step towards a clean future.