INSTRUCTION MANUAL
CODE 80342 REV O
11/2021 Page: 58
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.grupo-selecta.com
12. Safety thermostat
8. Safety thermostat regulation screw (grey).
9. Safety thermostat reset button (white).
12.1 Rearming the safety thermostat
Safety thermostat is an element to prevent the temperature from ex
-
ceeding a value. If by a fortuitous event the thermostat is triggered,
that is, it opens the power circuit, the heating element will stop working.
Usually there is an indicator light, or an error message, that indicates
that the thermostat is in this position.
If the thermostat is triggered, check that the equipment looks good and
it is not overheating at any point.
To change its status, simply press the white button (9), and you will
hear a “click” that indicates that the thermostat has been reset. If the
equipment has not cooled down sufficiently, the thermostat cannot be
reset, and you must wait for the temperature to drop before it can be
reset.
12.2 Adjusting the safety thermostat
In some equipment such as ovens and baths and with certain processes
it may be useful to adjust the thermostat trigger value, but this opera
-
tion should NEVER be performed to the rest of equipments.
From factory, the thermostat is adjusted to its trigger temperature, set
at 160ºC.
Stop the equipment and leave it to cool with the lid open for 15 minutes.
Notice to customers:
The product is made up of various components and various materials
that must be recycled or, failing that, deposited in the corresponding de
-
bris removal sites when the product’s life has been completed or when
otherwise it is necessary to dispose of it. To do this, the end user who
acquires the product must know the current regulations of each mu
-
nicipality and / or locality based on the waste electrical and electronic
equipment. The user who acquires this product must be aware of and
responsible for the potential effects of the components on the environ
-
ment and human health as a result of the presence of hazardous sub
-
stances. Never place the product in a conventional container of citizen
scope if a previous dismantling and knowledge of the components that
incorporates. If you do not know the procedure to follow, consult with
the city council for more information.
