Select Four 10SC Скачать руководство пользователя страница 41

Страница: 41 / 42

the goods fail to be of acceptable quality and the failure does not amount to

a major failure.
Model Engines (Aust.) Pty. Ltd., Unit 1, 158-168 Browns Road, Noble Park,

Victoria, 3174, Australia.
www.modelengines.com.au Ph (03) 8793 5555 warranties@modelengines.

com.au
This warranty information relates to goods supplied on a wholesale basis by

Model Engines (Aust.) Pty. Ltd. to Australian Retailers. The warranty complies

with Australian regulatory requirements and supersedes all warranty

information from the original manufacturer.

Declaration of Conformity

CE Conformity Declaration

This device has been tested in accordance with the relevant harmonised

European directives. This product’s design fulfils the protective aims of the

European Community relating to the safe operation of this equipment.

For a copy of the Declaration of Conformity, please visit:

www.ikonnik-rc.com/support

Disposal

Electrical equipment marked with the crossed out wheelie bin symbol must

not be disposed of in household waste, but must be taken to a specialist

disposal or recycling system. In EU member countries, electrical equipment

must not be discarded via the normal domestic refuse channels (WEEE

- Waste Electrical and Electronic Equipment Directive 2002/96/EG). You

should take unwanted electrical equipment to your nearest local authority

waste collection point or recycling centre.

Distributed in the UK by:
J Perkins Distribution Ltd,

Lenham,

Kent,

ME17 2DL.

www.jperkins.com

Содержание Four 10SC











































Результаты поиска

Содержание Four 10SC

Отзывы:

Бренды по названию

Популярные бренды

Select Four 10SC, Руководство пользователя и техническая информация

Результаты поиска

Содержание Four 10SC

Отзывы:

Бренды по названию

Популярные бренды