Pacific Operation Manual
4
Version 4 October 2010
Safety Warnings
1.0m
D
= 90
o
Not for residential use.
CAUTION: Hot Surfaces, Avoid contact by persons or materials.
The Pacific has some hot surfaces. Be careful to avoid burns. Take care with the lamp
house and Heat sink. We suggest the use of leather gloves when focusing these
luminaires.
SAFETY
– Mains Power Isolation
The Pacific range is fitted with a micro-switch that automatically disconnects the mains
power when the lamp holder is removed. However, it is also recommended that the
luminaire should always be electrically isolated from mains power before re-lamping,
cleaning or servicing.
CAUTION: Risk of fire - Use with max 1000 watt lamp.
CAUTION: For the 575W MSR model Pacific, use only a high-pressure lamp of the proper
size and type in this lamp system.
These luminaires are not suitable for mounting on a normally flammable surface.
These luminaires are not suitable for outdoor use. They are rated at IP00.
The luminaire should be at least 1.0 metre away from the nearest object it is lighting.
The Pacific range can be operated only through a range of angles 90
either side of
horizontal.
Operating your luminaire for the first time
When first opening the packing box for your luminaire,
please note that the lamp holder module is in a separate
box. Before inserting a lamp into the module, we suggest
that you practice the motion of removing and inserting the
lamp holder module from the lamphouse.
Loosen the thumb-screw at the front of the lamp
holder module by about 5mm. Holding the lamp
holder module by the Handle, slide it forward until
both the rear lip and the front 'T' of the lamp holder
module clear their home positions. Reverse this
action to replace the lamp holder and then tighten
the thumb-screw to lock the lamp holder module
into position.
1
2
Rear Lip
Front'T'