Selcom ST 400 Cayman Скачать руководство пользователя

Страница: 14 / 16

OPERATING MANUAL

When listening to demodulated signals, it is recommended to use headphones. Sound volume

is adjustable with a variable resistor (12, Fig. 2).

Recommendations

Any response observed on the red bar (or on both red and blue bar simultaneously) should be

analysed in the audio mode with the use of a test sound source. If a response has been observed

on the blue bar, it is advisable to perform audio analysis with the frequency combination #1,

subjecting the target area to mechanical impact (tapping). While probing, it is advisable to change

gradually the distance between the antenna and target within 5–100 cm range.

Push

to switch from the AUDIO mode to SEARCH.

2.6. Program Updates

ST400 Cayman has a processor that operates in accordance with the program firmware that

is pre-installed by the manufacturer company. Over time the firmware gets refined and newer

versions get released, that can be installed through the USB port.

‘What is my firmware version?’

In order to find out what firmware version is currently installed on your ST400, set it to

SEARCH, then press and hold it for 3 seconds. The three INPUT LEVEL bars (4, 5 and

6, Fig. 4) will light up, with the number of lit LEDs indicating the current version in the format

‘R.B.W’ (red, blue, and white). For example, if 1 red, 2 blue, and 5 white LEDs are lit up, then

the current version is 1.2.5.

Press any button to exit this mode.

Firmware update procedure

The newest firmware version, with issues sorted out or features added, can be downloaded

from http://spymarket.com/ (‘ST 40

CAYMAN’ section) and installed through the USB port

with the installer enclosed with the update files.

In order to update the ST 40

Cayman firmware, do the following:

– turn off the device (if activated)

– using a thin object, open the USB socket cover on the antenna panel (9, Fig. 4)

– connect ST40

Cayman to the computer using a USB cable

– turn on the device
– when the POWER led (4, Fig. 4) lights up, within 5 seconds briefly press

; after 5

seconds the power-on LED will go dim to indicate that the device is now in the updating mode

– turn off the device

– follow instructions in the README file that comes with the update.

WARNING!

Once the updating process has started, ST 400 Cayman can only be switched

into operation again upon completion of the update installation.

Содержание ST 400 Cayman

















Результаты поиска

Содержание ST 400 Cayman

Отзывы:

Похожие инструкции для ST 400 Cayman

Бренды по названию

Популярные бренды

Selcom ST 400 Cayman, Руководство по эксплуатации

Результаты поиска

Содержание ST 400 Cayman

Отзывы:

Похожие инструкции для ST 400 Cayman

Бренды по названию

Популярные бренды