www.selcomsecurity.com
ATTENTION!!!
It is FORBIDDEN to bring the ultrasound emission on the distance closer than 70 cm to the
ear.
It is FORBIDDEN to use the equipment people younger than 18 years old.
It is FORBIDDEN to add any changes to the integrated circuit protection and power supply,
due to large battery power capacity
PARTS OF CONTROL
NOISE – indicator of turning the noise interference.
BAT. – indicator of switching on the device and battery charge.
POWER – MINI USB socket connection of external source of power supply.
ON/OFF. – button switching ON/OFF the device power supply.
RC – indicator of signal receiver from RC..
RESET – reset button of the device for factory settings.
А – button switching off the noise interference.
В – button switching on the noise interference.
SWITCHING ON-OFF THE DEVICE
In order to turn ON the device, press and hold 3 sec. button POWER., till the sound signal
goes on. Simultaneously switching on the device power source turns on the noise interference,
which is affirmed through blue color indicator.
In order to switch OFF the noise interference is performed by pressing the A button on the
remote control RC. By this, indicator “NOISE” stops glowing and the device goes into standby
mode. Turning on noise interference again is being performed by pressing the B button on the
remote control RC.
In order to turn OFF the device press and hold 6 sec. button POWER till the sound signal goes
on.
