6 | P a g e
www.selcomsecurity.com
Whenever you plug in the USB power supply to the device, it will automatically turn off and
enter the charging mode.
IMPORTANT! Never charge ARCANE with antenna still attached to it - this may result in
serious Electro Static damage to pre-amplifier circuit.
Hard reset.
If the device will hang up, or other software issues will occur, you should process “hard
reset” by pressing the Reset pin, located on the left side of your ARCANE. Device will reboot
and load a touch panel calibration screen.
Touch panel calibration
Touch panel calibration can be done with a sharp end
stylus (included in the set), by pressing the center of the
targets that will appear in different parts of the screen.
Upon successful calibration, the ARCANE will load the "main
screen".
You can access touch panel calibration screen by pressing and
holding the screen during loading after turning ARCANE on.
