5 | P a g e
www.selcomsecurity.com
as non-suspicious will greatly increase the efficiency and speed of your ARCANE during further
search sessions. Please note that «white list» will be erased from ARCANE's memory upon
turning it off (if you want to keep the white listed cells add them to permanent memory).
IMPORTANT TO KNOW!
In order to keep information about the "non-dangerous signal" after
turning the device off, it must be stored into the long-term flash memory of the device.
Adding white-listed cell to permanent memory
Move to the last page of the screen. Click to select
cell. At the bottom of the screen, the active
buttons
«B/W»
and
«ROM»
will appear.
Upon selecting, option buttons
«B/W»
and
«ROM»
will appear at the bottom of the screen.
«B/W» -
will remove selected cell from white list
and move it back to first page of the main screen.
To store the information into the memory, press
the "ROM" button.
Pressing the
"YES"
button will record the
information of the bin file in the device memory.
The memory in the memory will be displayed with
the
"*"
in the first line of information.
Repeatedly pressing the
"ROM"
button again will
prompt you to erase it from the device memory.
NOTE
! Information from the flash memory "ARCANE" is automatically deleted when the
firmware is updated!
Turning off and charging.
Turning the device off is performed by pressing and holding the on/off button located on
the right side. As soon as you see the "Power Off" message - release the button
Before charging always detach the antenna from the
device. Mini-USB charging port is located at the left side.
