Schweitzer Engineering Laboratories, Inc.
SEL-3360-2 Data Sheet
9
Weight
4 kg (9 lb) maximum (SEL-3360S-2)
7 kg (15 lb) maximum (SEL-3360E-2)
Peripheral Connections
Video
Intel P530 Graphics Controller
As many as three total
displays using any
combination of DVI
and/or DisplayPort
outputs:
DVI-D outputs:
One display per output
Maximum resolution*: 1920 x 1080
@ 60 Hz
Digital output only; does not support
passive VGA adapters
DisplayPort 1.2 output
As many as three displays via
DisplayPort MST
Maximum resolution*: 4096 x 2304
@ 60 Hz (one display)
1920 x 1200 @ 60 Hz (three displays)
Cable length < 10 m for Surge
Immunity compliance.
*High-resolution displays require high-quality cables. Ensure your
display cables are as short as possible and rated for the required
screen resolution.
Audio
TSI (IDT) 92HD91 HD Audio Codec
3 Analog 3.5 mm TRS
Jacks:
Line input
Line/headphone output
Microphone input
Cable length <2 m for Electromagnetic
Compatibility Immunity compliance
Intel Display Audio
Digital Audio Outputs: DVI-D1, DVI-D2, DisplayPort
USB
4 Rear-Panel Ports, 2 Front-Panel Ports
USB 3.2 Gen 1 (SuperSpeed USB 5 Gbps)
2000 mA Maximum Current Each
Cable length <2 m for Electromagnetic Compatibility Immunity
compliance
2 Internal Ports on 1 Main Board Header
USB 2.0 (High Speed USB 480 Mbps)
Communications Ports
Ethernet
2 Rear-Panel, 1 Gbps Copper RJ45 Ports
ETH1:
Intel WGI219LM, 10/100/1000 Mbps
RJ45 copper
ETH2:
Intel WGI210IT, 10/100/1000 Mbps
RJ45 copper
Optional SEL-3390E4 or
SEL-3390T Expansion
Card (SEL-3360E-2
Only):
As many as four additional 10/100/1000
Mbps ports, copper or LC fiber SFP
Note:
See SEL-3390E4 and SEL-3390T instruction manuals for
additional information.
Serial Ports
Standard Ports:
2 EIA-232 ports, DB-9 connectors
300 to 115200 bps
(Meets EIA/TIA-562 Specifications)
Optional SEL-3390S8
Expansion Cards
(SEL-3360E-2 Only):
As many as 12 additional EIA-232/
EIA-422/EIA-485 ports, RJ45
connectors 300 to 921600 bps
Note:
See the SEL-3390S8 instruction manual for additional
information.
Time-Code Inputs and Outputs
Main Board (Input Only)
Connector:
COM1 DB-9 serial port
Time Code:
Demodulated IRIG-B TTL compatible
Optional SEL-3390S8 Expansion Card (Input/Output)
(SEL-3360E-2 Only)
Connector:
RJ45 serial port
Time Code:
Demodulated IRIG-B TTL compatible
Note:
See the SEL-3390S8 instruction manual for additional
information.
Optional SEL-3390T Expansion Card (Input/Output)
Connector:
BNC
Time Code:
Demodulated IRIG-B TTL compatible
Note:
See the SEL-3390T instruction manual for additional
information.
Note:
Outputs generated from either IRIG-B input or SEL-3360-2
clock.
Power Supply
See
Table 1
for additional burden information.
No Power Supply (SEL-3360S-2 Only)
Voltage Rating:
12 Vdc
Voltage Range:
10–16.6 Vdc
Typical Burden:
25 W
Max Burden:
144 W (cold startup)
Peak Inrush:
15 A
Negative input power terminal is internally tied to chassis ground.
SEL-9331 160 W LV Power Supply
Voltage Rating:
48 Vdc
Voltage Range:
38–58 Vdc
Maximum Constant Burden
External SEL-9331:
149 W
Internal SEL-3360E-2: 178 W
Maximum Peak Burden:
225 W
DC Ripple:
<15% rated voltage
Peak Inrush:
15.5 A peak, 48 ms duration
Measured per IEC 60255-1,
Section 6.10. Quiescent current level
derived from 40 W input.
Interruption:
100 ms @ 48 Vdc
Insulation:
3600 Vdc
Input Isolated From
Chassis Ground:
Yes
SEL-9331 160 W HV Power Supply
Voltage Ratings:
125/250 Vdc
120/220/240 Vac; 50/60 Hz
DC Range:
100–300 Vdc
Maximum DC Dropout:
88 Vdc
AC Range:
85–264 Vac
Frequency Range:
45–65 Hz
Maximum Constant Burden
External SEL-9331:
155 W, 160 VA
Internal SEL-3360E-2: 188 W, 194 VA