SEL-3360-2 Data Sheet
Schweitzer Engineering Laboratories, Inc.
6
Figure 8 Rear-Panel Diagram
q
DVI-D
. Connect digital monitors by using native DVI or an HDMI adapter.
w
ETH1
and
ETH2
. Onboard independent Gigabit Ethernet interfaces.
e
USB
Ports. Connect as many as four USB 3.1 peripherals at the rear panel.
r
AUDIO
Ports. Line Input (blue), Line Output (green), and Microphone Input (pink).
t
COM1
and
COM2
. Standard EIA-232 serial ports with config5 Vdc power on Pin 1.
y
DISPLAYPORT
. Connect new digital monitors supporting the DisplayPort interface.
u
GROUND
Terminal Screw. The earth ground connection for the SEL-3360-2.
i
POWER
Input Terminals. The rated input voltage is clearly marked on the chassis near the terminals.
o
ALARM
. The Form C alarm contact output enables both normally closed and normally open wiring connections.
a
PCI
Expansion Slots. Install SEL or third-party PCI Express expansion cards for additional network, serial, or other
application-specific I/O.
y
y
t
r
t
r
e
w
o
u
u
i
o
a
i
q
q
e
w