7
4. REPAIR
4.1. Current repair of the product is carried in accordance with Table 2.
Table 2
Failure and damage
consequences
Possible Reasons
Eliminating consequences of
failure and damage
No LED when pressing
the buttons
-
Batteries
are
depleted
- Contacts in battery
compartment
have
been oxidized
- LEDs have failed or
worn out
- Replace batteries
-
Clean contacts in battery
compartment
-
Replace LEDs
5. STORAGE
5.1. Storage conditions.
5.1.1. The device should be stored packed on the shelves in the capital heated
rooms at temperature from 5 °C to + 40° C and a relative humidity of 80% at
temperature of +25 °C at no vapors of acids, alkalis, current-conducting dust and
other chemically active substances, gases that cause corrosion and destroy
insulation. It can be stored in a standard package when stacked (horizontally
cover up) on the shelves with up to 4 products. Stacking in a vertical position is
not allowed.
5.2. Storage life
5.2.1. Storage life of the product in a standard package is 1 year (without
batteries) in heated ventilated premises at ambient temperature from + 50 °C to
+ 40 °C and a relative humidity of 80% at a temperature of 25 °C.
5.3. Terms of placing the product in storage and withdrawing it from
storage.
5.3.1. When placing the product for storage, its components must be carefully
packed in standard package to the appropriate places in the installation. When
withdrawing it from storage, the components of the product should be removed
from the package and keep the product under standard climatic conditions for at
least 12 hours.
6. TRANSPORTATION
6.1. Requirements for transportation and transportation conditions.
6.1.1. Transportation of the device is carried out in a transport container by all
kinds of goods and passenger transport at a height of no more than 12,000
meters at ambient temperatures from -40 °C to + 60 °C and protected against
direct exposure of precipitation and reactive components. When carried in