6
2.2.4. Install a new CR123A battery into the battery compartment of the device
with "-" up, carefully observing polarity.
2.2.5. Close the battery compartment cover tight to prevent the penetration of
foreign objects and water into the case while operating the device.
2.3. Product Use
2.3.1. Bring the eyepiece of the device to the eye and direct the output window
with LED emitters onto the inspected object.
2.3.2. Adjust image sharpness in the eyepiece by turning diopter adjustment ring
clockwise or counterclockwise. Get the best visibility for your eyes.
2.3.3. To search for hidden television surveillance systems, use all modes of
operation of LED emitters alternatively.
2.3.4. To work in constant radiation mode, press and hold continuous mode power
button.
2.3.5. To switch to pulse mode, press and hold continuous mode power button and
then press and hold pulse mode power button (pulse mode is activated when both
buttons pressed).
2.4. Safety measures
2.4.1. In case of fire on the device, power off the device and to take measures to
put out fire.
2.4.2. In case of emergency operating conditions (high temperature, humidity,
vibration, etc.), take measures to reduce the impact of accidental factors on the
product.
3. MAINTENANCE SERVICE
3.1. Product maintenance does not require special training of staff.
3.2. Any oxidation and salt presence on the surfaces of the batteries must be
avoided. When any appear, the batteries must be replaced.
3.3. The optical surfaces of the device (eyepiece, output window) when dirty
should be cleaned only with a clean cloth made of genuine or microfiber suede,
designed for cleaning optical parts (eg glasses). Before that, blow away the grains
of sand and dust. To remove heavy grease, use a cotton swab moistened in ethanol,
having preliminary removed solids from the optics with a soft brush.
3.4. Product functional testing and its technical inspection is controlled by
checking paragraphs 1.2.2., 1.2.9., 1.2.10.
3.5. Preservation (degreasing, reconservation) of the product is carried out by
packing it in its standard packing (cover).