background image

Introduction

Thank you for choosing Sejoy BG-709 blood glucose monitoring 
system.  Before you start testing, carefully read this 

Owner’s Booklet.

Intended Use

The Sejoy BS-602 Test Strips are used with the Sejoy BG-709 Blood
Glucose Meter to quantitative measure blood glucose with fresh capillary whole 

 

blood 

 

or venous blood or neonatal blood. The system is intended for in   

 

vitro diagnostic home-use and by healthcare professional in a clinical setting as   

an aid to monitor the effectiveness of diabetes control. This system is not for use in

the diagnosis of diabetes mellitus.

Test Principle

1

 

  

  

 

 

 

 

 

Peel off the insulation film from battery compartment before first use.

 

 

The strip measures glucose by using amperometric technology
employing a glucose dehydrogenase reactio When whole blood or

n. 

control solution is drawn into the tip of a test strip  

,

glucose in the

sample reacts with chemicals and produces an electrical current. The
meter measures electrical current and calculates amount of glucose.
The glucose result is displayed as a calculated plasma value.

 

Venous whole samples collection and preparation should be obtained

by healthcare professionals. 

Содержание BG-709



















































Отзывы: