Seiwa WLZAA14021, Инструкция по эксплуатации

Страница: 5 / 7

5
Check Point Inspection Confirm: Remedy
Appearance Visual - No rust
- No scratches
- Clean.
- Anticorrosion
treatment
Bolts/screws Visual, Tactile - No loose parts
- No rust
- Retighten.
- Clean.
Gaskets, etc. Visual - No cracks
- No serious deformation
- Replace.
Cable entry Visual, Tactile - No damage or degradation
- No loose parts
- Replace.
- Retighten.
Joints Visual, Tactile - No loose parts
- No stained insulator
- Retighten.
- Clean.
Temperature rise Thermometer,
Tactile
- The surface temperature
should be not more than
85°C.
- Investigate the cause.
- Turn off the power.
(1) In cleaning the fitting, gently wipe with water or mild detergent. Don’t use thinner, benzene or alkaline detergent.
Such chemicals might cause discoloration or deterioration in quality and strength, resulting in a damage.
(2) Prior to maintenance, be sure to turn off the power.
(3) Conduct inspection properly referring to the table below.
(4) If a repair is needed, consult us.
Maintenance