Seiwa Techmarine Скачать руководство пользователя страница 87

Страница: 87 / 158

User Manual

7. Maintenance

This chapter gives information on routine maintenance and problem solving asso-

ciated with the chart plotter.

7.1

SYSTEM TEST

If you have connected your position-finding device according to the instructions,

and chosen the proper menu selection for your device, and are still having problems

with your chart plotter, the extended auto-test should help determine the problem.

Make sure the chart plotter is turned Off. While pressing and holding any other

key, turn the chart plotter On. A new menu will appear on the display.

Use the cursor key to select the desired test: this will display in reverse video. To

choose the test press [ENTER]. To exit from any submenu press [CLEAR]. To

exit from the System Test turn Off the chart plotter.

7.1.1 RAM Menu

RAM clear: Clears internal memory. If the chart plotter exhibits unusual behav-

iour, or appears to be malfunctioning, it may be possible to correct the problem

by clearing RAM. This operation will erase all Marks, Routes, stored Track plots

and destinations. It will also return all selections (Input Data Format, Autopilot

selection, etc.) to original default values. Before this step, you have the option of

saving user Marks, Track history and Routes to a User MEDIA (this is an optional

purchase from your dealer). To confirm to clear RAM press [ENTER] again (but if

this time you do not wish to clear RAM press [CLEAR]).

7.1.2 DIM Menu

Contrast: Each time you press the cursor key to right, the screen will decrease

contrast, when you press the left key the contrast will increase.

Brightness: Each time you press the cursor key to right, the screen will decrease

brightness, when you press the left key the brightness will increase.
T-59.01:

Keylight: Sets the brightness for the keys and it operates in similar mode as

Brightness menu.

7.1.3 Media

Data Base Test: Tests the Worldwide Background.

MEDIA Test: Tests the MEDIA. There are four possible situations:

♦

If there is a MEDIA inserted in the slot and there is not a malfunction,

the name of the MEDIA zone and the message "OK" are shown

♦

If there is a MEDIA inserted in the slot, but it is damaged MEDIA, the

name of the MEDIA zone and/or the message "Faulty" are shown

♦

If there is not any MEDIA inserted in the slot, the message "not present"

is shown

♦

If there is a User MEDIA inserted in the slot, the message "USER ME-

DIA" is shown

MEDIA Connector: While a MEDIA is inserted in the slot, if the counter increases,

there is a malfunction reading it.

Содержание Techmarine































































































































































Результаты поиска

Содержание Techmarine

Отзывы:

Похожие инструкции для Techmarine

Бренды по названию

Популярные бренды

Seiwa Techmarine, Руководство пользователя

Результаты поиска

Содержание Techmarine

Отзывы:

Похожие инструкции для Techmarine

Бренды по названию

Популярные бренды