Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . ….. . . ….. . . . . . 3
Specifications . . . . . . . . . . . . . . . . . ….. . . . …. . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . ….. . . . . …. . . . .5
Operation . . . . . . . . . . . . . . . . . . . . . . ….. . . . …. . . . .7
Key Functions . . . . . . . . . . . . . . . . . . . . …. …. . . . . . 7
Turning Alarms ON/OFF . . . . . . . . . . . . . …. . . . . . . 7
Backlight Intensity . . . . . . . . . . . . . . . . . . . …… . . . . 7
Selecting Feet, Meters, Fathoms . . . . . . . . ……. . . . . 7
Setting Shallow Alarm . . . . . . . . ……….……. . . . . . 8
Setting Deep Alarm . . . . . . . . . . . . …….………….. . 8
Setting Anchor Drag Alarm . . . . . . . . . ……....... . . . . 8
Setting Keel Offset . . . . . . . . . . ………. . . . . . …. . . . 9
Setting Display Damping . . . . . . . …. . . . . . . . . …. . . 9
Selecting NMEA 0183 or External Alarm Output . . . . 9
NMEA 0183 Sentence . . . . . . . . . . . . . . . . …….. . . . 10
Notes and Warnings . . . . . . . . . . . . . ……………. . . . 11
Other Seiwa Products . . . . . . . ……… . . . . . . . . 12
Introduction
The SW RP05 is a compact digital depth gauge. The SW RP05 uses
Digital Signal Processing (DSP) to reliably display water depth
from 1.2 to 1000 feet (0.3 to 365 Metres). Depth can be
displayed in feet, metres or fathoms. Variable display damping
is provided.
The SW RP05 has programmable shallow, deep and anchor drag
alarms built-in and can display the depth in feet, metres or
fathoms. A keel offset from -20.0 to +20.0 feet can be entered
so the SW RP05 shows the depth below the surface, below the keel
or below the transducer. Under 20 feet, Meters or Fathoms,
the depth is displayed in tenths.
The SW RP05 outputs NMEA 0183 serial data as a standard $SDDPT
(Depth below the transducer) sentence. If not required, the
NMEA 0183 data line can be programmed as an external alarm
output.
A separate backlight control wire turns the backlights on and
off. Five levels of backlighting (including OFF) can be
selected and all set-up, calibration constants and alarm values
are saved to non-volatile memory.
The SW RP05 works with a 120kHz depth transducer and both
through-hull and transom mount transducers are available.
Specifications
Power supply:
9.50 to 16.00 VDC, .037 amps nominal
Operating temperature:
32 to 122 F° ( 0 to 50 C°)
Size:
4.3" x 4.3” x 3.5” deep (110 x 110 x 89 mm deep).
Содержание SW RP05
Страница 1: ...SW RP05 ...
