Seiwa SW RP03, Системное руководство

Страница: 8 / 12

You can add and delete sentences to/from this list as often as desired. Pressing the or key will step you through the
list. “- - - -” will be displayed until the selected sentence is found on one of the channels.
Adding A Sentence To the List
Press and hold the and keys for 10 seconds until a long beep is heard. “c011” is displayed. Use the and
keys to select a sentence from Table 1. Once the desired table entry is displayed, hold down the key for 1/2
second to save the sentence to the list. The
SW RP03
will immediately start searching for the new sentence on all four
channels.
If “FULL” is displayed in place of “c011”, a sentence will first have to be deleted from the list (see “Deleting A Sentence
From the List”).
Deleting A Sentence From the List
If all 12 list positions are full, one sentence will have to be deleted. Press and hold the and keys for 10 seconds.
Use the and keys to scroll through the list. When the sentence to be deleted is displayed, press the key for
1/2 second.
Manually Selecting A Data Channel
The
SW RP03
searches each of the four data channels for the desired sentence. When a matching sentence is found
the
SW RP03
stops at that channel and displays the data. To select between two or more data channels containing the
same sentence, press and hold the key for 3 seconds. The
SW RP03
will search the other channels for the sen-
tence. If the sentence is only available on the one channel, it will return back to the original.
Downloading New NMEA Sentences
You can add up to 10 new sentences to Table 1 using a PC and a serial data cable connected to channel 4 on the
back of the
RP03
as shown in Figure 4. To upload a new sentence to the
RP03
, press and hold the and keys
for 10 seconds. The instrument is ready for data transfer when “rdY” is displayed. Now run the
SW RP03
program soft-
ware. When a beep is heard check the display for the status of the transfer, if “good” is displayed, the process was
successful. If “bAd” is displayed, the process was unsuccessful, try the download process again.
NMEA 0183 Sentences - TABLE 1
1 USER PROGRAMMED
2 USER PROGRAMMED
3 USER PROGRAMMED
4 USER PROGRAMMED
5 USER PROGRAMMED
6 USER PROGRAMMED
7 USER PROGRAMMED
8 USER PROGRAMMED
9 USER PROGRAMMED
10 USER PROGRAMMED
SW RP
03 SYSTEM MANUAL
6
11 $AGAAM WAYPOINT ARRIVAL ALARM RADIUS
12 $AGAPB MAGNITUDE OF CROSSTRACK ERROR
13 $AGAPB BEARING ORIGIN TO DESTINATION
14 $AGAPB BEARING PRESENT TO DESTINATION
15 $AGAPB HEADING TO STEER TO DESTINATION
16 $AGBEC BEARING DEGREES TRUE
17 $AGBEC BEARING DEGREES MAGNETIC
18 $AGBEC DISTANCE NAUTICAL MILES
19 $AGBOD BEARING TRUE
20 $AGBOD BEARING MAGNETIC