Seiwa SW RP03, Системное руководство

Страница: 6 / 12

Specifications
Power supply: 9.5 to 33 VDC, 35 mA nominal
Operating temperature: 32 to 122 F° ( 0 to 50 C°)
Size: 4.3” x 4.3. x 3.5. deep (110 x 110 x 89 mm).
Display: 4 digit LCD, 5 levels of backlighting.
Input Format: NMEA 0183, standard and proprietary sentences.
Baud Rate: 4800
Input Channels: 4
Data Input voltage range: 0 to 5 V Nominal, -20V to +20V maximum.
Data Memory: Storage for 10 new sentences (may be overwritten).
Installation
Before starting the installation, please read this entire section first. Finger tighten the screws that mount the instru-
ment bracket - It is not necessary or recommended to use tools.
For mounting the instrument, see the Figure 1
1 Connect the various wires as shown in Figure 2 and 3.
1 Carefully check all your wiring against figures 2 and 3 and then mount the instrument in the hole. Use only finger
tension to tighten the bracket hold-down nuts
SW RP
03 SYSTEM MANUAL
4
Finger tighten - Do not use tools
Mounting
Bracket
2-1/8” (55 mm) hole
FIGURE 1