Seiwa SW RP03, Системное руководство

Страница: 7 / 12

Operation
Key Functions
The , and keys are used to select and set backlight levels, and set/change constants such as which NMEA
sentences to display, select a data channel, save and delete NMEA sentences from the favorites list and prepare the
instrument to receive new sentences from a PC. New information is automatically saved to non-volatile memory.
Backlight Intensity
Press the key 1/2 second to adjust the backlight level for night viewing.
Each time you press the key 1/2 second, the level will get brighter 1, 2, 3, 4, OFF, 1, 2, ... etc.
The blue wire be switched to +12/24V for the backlights to work and offers external backlight ON/OFF control, if the
ON/OFF control is not required, connect the blue wire to +12/24VDC permanently.
Selecting a NMEA Sentence to Display
Up to 12 sentences can be stored in a list of often viewed sentences. You can select a sentence from the list using
the and keys.
SW RP03
comes pre-programmed with the following list:
142 $SDDPT DEPTH RELATIVE TO TRANSDUCER MTRS
163 $VWVHW SPEED KNOTS
160 $VWMTW WATER TEMPERATURE DEGREES
98 $GPRMC COURSE OVER GROUND DEGREES TRUE
36 $AGWNC DISTANCE WAYPT TO WAYPT N.MILES
125 $PBVE T-30 TEMPERATURE DEG. FAHRENHEIT
129 $PBVE OP-30 PRESSURE P.S.I.
124 $PBVE RH-30 ENGINE RPM
SW RP
03 SYSTEM MANUAL
5
RED #1 - Battery 9.5 to 33.0 VDC
BLU #1 - Backlight On/Off
BLACK #1 - Power ground
Cable #1
Cable #2
VERDE #2 - channel 1
BLU #2 - channel 3
GIALLO #2 - channel 2
BIANCO #2 - channel 4
FIGURA 2
RED #1
BLUE #1
5 Amp Fuse
9,5 TO 33 VDC
LIGHT on/off
Power Ground
BLACK #1
GREEN #2 - channel 1
BLUE #2 - channel 3
YELLOW #2 - channel 2
WHITE #2 - channel 4