CAUTION
・ Do not leave moisture, perspiration and
dirt on the watch for an extended time.
Be aware of the risk that a water resistant
watch may lessen its water resistant
performance due to deterioration of
adhesive on the glass or gasket, or the
development of metallic rust.
・ Do not wear the watch while taking a bath
or using a sauna.
Steam, soap or some components of a
hot spring may accelerate deterioration of
water resistant performance of the watch.
・ Do not pour running water directly over the
watch from a faucet.
The water pressure of tap water from
a faucet is high enough to degrade the
water resistant performance of a water
resistant watch for daily use.
■ The watch requires good daily care.
・ Wipe away moisture, perspiration or dirt with a soft
cloth.
・ To clean the clearances （around buttons, case back,
etc.） a soft toothbrush is convenient.
Daily Care
P
R
O
D
U
C
T
43
・ Do not wear the watch for scuba diving or
saturation diving.
The various tightened inspections under
simulated harsh environment, which are
usually required for watches designed for scuba diving or
saturation diving, have not been conducted for the water-
resistant watch with the BAR （barometric pressure） display.
For diving, use divers’ watches for diving.
■ Water Resistance
This watch is water resistant under normal everyday
life situations.
Indication on
the case back
Water resistant
performance
Conditions of use
WATER
RESISTANT
Water resistance
for daily use
The watch withstands accidental contact
with water under everyday life situations.
WARNING
Not suitable for swimming
WARNING
CAUTION
・ Do not turn or pull out the crown when the
watch is wet.
Water may get inside of the watch.
※ If the inner surface of the glass is clouded
with condensation or water droplets appear
and remain inside the watch for an extended time, the
water resistant performance of the watch is deteriorated.
Immediately consult the retailer from whom the watch was
purchased or SEIKO CUSTOMER SERVICE CENTER.
・ In order to maintain the water resistant performance at
factory-adjusted level, make sure to replace the gasket
when replacing the battery.
P
R
O
D
U
C
T
42
Product Handling Precautions （Continued）
Display mode change （p.46）
Button
45
Demonstration （p.60）
Time setting （p.50）
Time zone change （p.56）
Button C
To prevent pressing the button by mistake, the
button C has a roof, so that the button C has a
harder-to-press construction than other buttons.
※ When operating the button C, be careful to prevent your finger
or nail from being injured from the roof on top of the button.
Button
Button
C
B
A
■ Names and Functions of
the Buttons
■ Button C
P
R
O
D
U
C
T
Names and Major Functions of Each Part
44
This watch utilizes an electrophoresis panel
（electronic ink display）. Radically new display
characteristics which present beauty while
wearing are realized through advanced technology.
T h e g r a p h i c s w h i c h c o n t i n u o u s l y m a k e a
rough circuit in ring form have been shaped
by maximizing the flexible proper ties of the
electrophoresis panel with SEIKO’s technology.
The ring-shaped sapphire glass with no joints
has been carefully manufactured by advanced
technology by cutting cylinder sapphire glass
piece by piece and polishing it into ring geometry.
The case is also formed after being shaped from
a chunk of metal and the use of lightweight bright
titanium for the base material enhances the
feeling of wearing.
■ Time Display
Hour and Minute are displayed in two mode
types.
Use them according to mood or scene.
→ Two Types of Time Display Modes （p.46）
■ Animation
A short animation is displayed at every
scheduled time.
→ Mystery Mode （p.47）
The animation can be optionally viewed for
approximately 55 seconds.
→ Demonstration Function （p.60）
■ Time Zone Change Mode
You can adjust to a local time overseas.
→ Time Zone Adjustment （p.52）
■ Battery Life Indicator
When the battery is expiring, the battery life
indicator appears.
→ Battery Life Indicating Function （p.61）
P
R
O
D
U
C
T
Features
Содержание SRXG001
Страница 1: ...http www seiko watch co jp ...
