Seiko S833, Инструкция по эксплуатации

Страница: 162 / 189

(2) Explanation of display
Atmospheric pressure tendency graph：
Atmospheric pressure is automatically measured every hour and atmospheric
pressure tendency is displayed in a graph format.
A flashing dot of the graph indicates the latest measurement.
Current atmospheric pressure：
Atmospheric pressure measured automatically or manually is displayed.
Display unit：1 hpa, 0.01 inHg
Measurement range：between 300 and 1,100 hpa, between 8.85 and 32.48 inHg
Current temperature：
Display unit：0.1℃, 0.1℉
Measurement range：between ｰ13.0 and 63.0℃, between ｰ8.6 and 145.4℉
[Caution] • Temperature measurement is affected by bodily temperature and direct sunlight.
When measuring outside air temperature, remove the watch from your wrist, leave
it untouched for a while, and, then, start measurement at a place where it is not
exposed to direct sunlight.
• If the watch is placed under the running water from a faucet, very high water pressure
is applied to it. The measurement accuracy of the built-in pressure sensor degrades
temporarily, and the measurement values of altitude and atmospheric pressure
may fluctuate. If such occurred, wait for about 10 minutes until the measurement
accuracy of the sensor recovers, and then, start altitude measurement again.
※When atmospheric pressure and/or temperature measurement exceeds the measurement range, "- - - -" is displayed.
※Each dot of atmospheric pressure tendency graph represents 2 hPa (0.06 inHg) along the vertical axis and 1
hour along the horizontal axis. The graph shows the atmospheric pressure tendency for the past 20 hours. The
atmospheric pressure measurement is continued while other modes are used, and the tendency graph is kept
updated.
FIELD
MODES
4
162