Seiko S833, Инструкция по эксплуатации

Страница: 157 / 189

Climbing speed: Indication is updated every 10 seconds.
Range of display: Between -9999 and 9999 m/h or ft/h
Altitude: Indication is updated every 10 seconds.
Range of display: Between -699 and 9,164 m/between -2,290 and 30,065 ft
Current time
• Altitude calibration
The Altimeter mode of this watch calculates altitude based on atmospheric
pressure. Measurement error may result, therefore, if atmospheric pressure
and temperature change due to weather change or any other reason. Before
using the Altimeter mode or turning on the Field Mode REC function, calibrate
the Altimeter at a place with a known altitude. Altitude information can be
obtained from a map, the Internet, and other sources.
(3) Altitude calibration, Drift Cancel, and unit of measure setting
(2) Explanation of display
※The interval of measurement and display differs depending
on whether the Field Mode REC function is turned on or off
(see "How to Use Field Mode REC function" on P. 142).
• Drift Cancel function
Even while you stay at the same place, altitude measurements may vary due
to change in atmospheric pressure. The Drift Cancel function prevents the
Altimeter from being affected by such atmospheric pressure change.
FIELD
MODES
4
157