Seiko S833, Инструкция по эксплуатации

Страница: 161 / 189

Button Ⓑ
Button Ⓐ
Button Ⓒ
Button Ⓓ
Button Ⓔ
Button Ⓕ
Button Ⓐ ：To show Compass mode
Button Ⓐ （Press and hold）：To show Weather mode
Button Ⓑ ：To show Time/Calendar mode
Selection of unit of measure setting display
Button Ⓒ ：To change over unit of measure
Button Ⓒ （Press and hold）：To start ALTI REC function
Button Ⓓ （Press and hold）：To activate unit of measure setting
function
Button Ⓔ ：To restart atmospheric pressure/temperature
measurement
To change over unit of measure
Button Ⓔ （Press and hold）：To start Field Mode REC function
Button Ⓕ ：To turn on illuminating light
Button Ⓕ （Press and hold）：To start Bluetooth communication
How to Use Barometer/Thermometer Mode
・Atmospheric pressure and temperature are measured and displayed.
・The units of measure for atmospheric pressure and temperature can be changed over
between hectopascal ("hPa") and inch of mercury ("inHg"), and between Celsius ("℃")
and Fahrenheit ("℉"), respectively.
※Setting of the units of measure can also be made in the application. By pressing and holding Button
Ⓕ to perform Bluetooth communication, the settings made in the application take effect in the watch.
Note that those settings will not be transmitted to the watch through automatic synchronization.
(1) Buttons and functions
・Press Button Ⓐ to show the Barometer/Thermometer mode. After "BARO" appears
at the top row, current atmospheric pressure, temperature and atmospheric pressure
tendency graph are shown.
FIELD
MODES
4
161