Seiko S149, Инструкция по эксплуатации

Страница: 11 / 20

−−−−−−−−−−−−−−−−−−−− CONTENTS −−−−−−−−−−−−−−−−−−−−−−−
１.FEATURES ……………………………38
２.DISPLAY AND BUTTON/SWITCH
OPERATION ……………………………39
３.TIME/CALENDAR ……………………40
４.HOW TO USE THE
STOPWATCH …………………………40
５.HOW TO USE THE MEMORY
FUNCTION………………………………48
６.HOW TO PRINT OUT ………………53
７.HOW TO USE THE AUTO
START FUNCTION …………………59
８.HOW TO INSERT BATTERIES INTO
THE PRINTER …………………………64
９.TIME・CALENDAR
SETTING ………………………………65
10.PRECAUTIONS ………………………68
11.REMARKS ON THE
BATTERIES……………………………71
12.REPLACEMENT OF THE LIQUID
CRYSTAL PANEL …………………72
13.CARE OF YOUR WATCH …………72
14.TROUBLESHOOTING GUIDE ……73
15.SPECIFICATIONS …………………74
２.DISPLAY AND BUTTON/SWITCH OPERATION
Paper advancing switch:
With each press of the switch, one line
is advanced. The paper is advanced
continuously by keeping the switch
pressed.
Mode selection button:
① Stopwatch mode (accumulated
elapsed time or lap time mea-
surement in progress display)
② Auto start setting mode
③ Time/calendar mode
Print mode selection switch:
Split time and lap time are
printed out.
c Upper position
d Lower position
Split time is printed out.
Readout selection button:
With each press of the button, the
measurement is displayed in 1/100
seconds and one second alternately.
LAP
SPLIT
SPLIT
Roll paper cover:
Set the roll paper inside the
cover.
Power switch for printer
Lock lever:
The lever locks button ○ Ａ
Grip switch selector
When the grip switch is used.
c Upper position
d
Lower position
When the grip switch is not used.
EXT
▲
Button ○ Ａ
Button ○ B
Start/stop
Split/lap reset
Stopwatch mode
Selection of the digits
to be adjusted
Auto start setting
and Time/Calendar
mode
Memory recall button:
With each press of the button,
the times stored in the memory
can be recalled.
Jack for auto start
The jack is used for transferring
the auto start time.
Jack for grip switch:
The jack connects the
grip switch with the
stopwatch.
BLOCK
F
E
SYSTEM STOPWATCH
300LAP ／ SPLIT MEMORY
POWER
ON
LOCK
LAP ／ SPLIT
RESET
START
STOP
CLEAR
1/100 STOP.W A/S SET TIME
RECALL
STOP-W. A/S SET TIME
Setting the digits
39
１.FEATURES
● Cal. S149 is suitable for measuring massive time date
in a road race, marathon race, etc.
① With the use of the built-in printer, the measured
time data can be printed out as soon as they are
obtained.
② Year, month, date and time when the measurement is
started can be printed out, and therefore, it is easy to file
and keep the data.
③ An auto start function is provided. By presetting the
time when the measurement is started, the stopwatch
starts measuring automatically at the designated time.
④ Memory recall function……Up to 300 measurement
data can be stored in memory. Measurement data
obtained from the start to finish of the measurement
is recorded as a block without erasing the data in the
previous block, and up to 100 blocks of data can be
stored in memory.
This function is very useful for separately keeping
the data measured at different time and date.
⑤ Besides, the stopwatch is equipped with such
convenient functions as ID No. function useful for
keeping the data of individual users separately, and
memory capacity indicator and fastest lap time recall
functions.
⑥An antibacterial agent is applied to the case surface of
the stopwatches.
＊It loses its antibacterial effect gradually over time and the
effective period differs depending on the conditions of
use.
● Used with optional devices, the stopwatch can perform
various functions.
① By connecting the stopwatch to SEIKO Digital Stopwatch
Cal. S143, more than two stopwatches can start
measuring simultaneously at a fixed time. Therefore, it is
possible to measure the time in a road race or marathon at
different checkpoints more accurately.
② Connected with a grip switch (optional accessory), the
stopwatch can be operated more easily.
③ With the use of a paper extension holder (optional
accessory), massive time data (approximately 2,500 data)
can be printed successively at a time.
SEIKO Digital Stopwatch Cal. S149 is a time measuring device that can record the
measurements with the use of the built-in printer. In addition, used with the
stopwatch Cal. S143 or a grip switch, Cal. S149 can perform various functions.
38
３.TIME/CALENDAR ４.HOW TO USE THE STOPWATCH
Notes on the block of data in memory
・The SEIKO Stopwatch Cal. S149 features a "Block Memory"
stopwatch operation system. The data obtained from start till finish
of a race is recorded as a block and stored in memory.
・The time and date of starting the measurement of a block of data are
automatically stored in memory.
・Before the measurement is started, the block number is assigned to
the block of data to be measured.
・Up to 300 data can be stored in memory.
・A block of data includes at least three data. If more than one block is
used to store the data, the memory become full even before the
number of lap time/split time measurements in memory amounts to
300.
RECALL
BLOCK
STOP
BATT.
LAP
F
E
300LAP ／ SPLIT MEMORY
LOCK
LAP ／ SPLIT
RESET
START
STOP
CLEAR
1/100 STOP.W A/S SET TIME
RECALL
Button ③
(TIME)
STOP-W. A/S SET TIME
ID
RECALL
BLPOK
STOP
BATT.
LAP
Year
Month
Date
Time (10'8''59)
Time/calendar mode mark
＊Time displayed in the 24-hour indication
Display in the time/calendar mode
40
□
１
Press mode selection button ③ (TIME) to set
the time to the Time/calendar mode .