-
30
-
Hints
The printer function setting for the marked paper is different from that for non-marked
paper.
See Section 7, Function Settings, for details.
The printer also supports the paper roll of max. 58 mm external diameter.
If the internal diameter of the paper roll is different from that of the paper roll adapter, it
is necessary to reduce the external diameter of the paper roll against its loose-fitting.
For details, refer to the
MPU-L465 Technical Reference
.
When using a paper roll of a different width, remove the paper powder from the platen
roller before use.
See Section 10, Print Head/Platen Roller Maintenance, for cleaning the platen roller.
Using a paper roll for long periods of time may affect print quality.
(If a paper roll of a different width from the current installed one is installed for long
periods of time, the print quality may be degraded due to wearing of the platen roller.)
If the label is set in the main body for a long time, it is affected by the ambient
environment and the label surface sticks to the head and the label may not be fed. In
this case, open the paper cover, release the contact between the head and the label,
close the paper cover again and perform label positioning (paper print positioning) by
feeding before use.
Hints
Do not touch the gears attached to the platen roller and feed roller. Doing so might
degrade the print quality or cause a failure.
TL-L465NS label is not ideal for automatic peeling. When an automatic peeling
function is used, always use TL-L465NP or DTH9500 (MACtac) label.
