- 19 -
Peeler mounted printer (-17
)
(1) POWER button
This button is used to turn the printer ON and OFF.
To power the printer on, hold down the POWER
button until the POWER lamp lights. To turn the
printer off, hold down the POWER button until the
POWER lamp goes off.
(2) FEED button
This button is used to feed the paper. Once this
button is pressed when using the marked paper,
the paper is fed to the start of the next paper.
Once this button is pressed when not using the
marked paper, the paper is slightly and gradually
fed. Continuing pressing this button advances
paper feeding.
(3) REPRINT button
This button is used to print the previous print again.
Reprint is available when the REPRINT lamp
lights. When the button print is valid, the
REPRINT button has the function to start the next
print. When the REPRINT lamp is blinking 3 times
(fast blinking), the REPRINT button cancels the
“suspension” and can start the next print.
(4) POWER lamp
The POWER lamp lights when the printer is turned
on. See the Power Lamp Indication shown on
page 21 for details.
(5) REPRINT lamp
The REPRINT lamp lights in case the previous
print can be reprinted.
(6) Interface cover
This cover is used to connect the interface cable
and the AC adapter, and insert the connector.
Open the rubber cover and insert the connector.
(8)
(7)
(9)
(7)
(12)
(13)
(11)
(12)
(6)
(3)
(2)
(1)
(10)
(4)
(5)
(17)
(18)
(15)
(14)
(16)
(19)
