manualshive.com logo in svg

Seiko LTPD245D, Техническое описание

Поделиться
Скачать
Seiko LTPD245D Скачать руководство пользователя страница 9

CHAPTER 1 

PRECAUTIONS 

Read through this technical reference to design a product and to operate the printer properly.    Pay special 
attention to the precautions noted in each section for details.    Information contained in this technical reference 
is subject to change without notice. 
For the latest information, contact our sales representative. 

Sufficient evaluation and confirmation should be performed with the designed outer case mounted, to ensure 
proper use of the printer. 

SII shall not be liable for any damages and/or loss that are caused by improper handling of the printer, any use 
not contained in this technical reference or that result from the outer case, unless such damages and/or loss 
originate from the printer itself. 

SII has not investigated the intellectual property rights of the sample circuits included in this technical reference.   
Fully investigate the intellectual property rights of these circuits before using. 

The printer is designed and manufactured to be mounted onto general electronic equipment.    If high reliability 
is required of the printer in respect to hazardous influences on the body or life and loss to property, redundant 
design of the entire system should be carried out and verify the performance with your actual device before 
commercialization.  And our sales representative should be informed as such in advance. 

Follow the precautions listed below when designing a product using the printer.    Include any necessary 
precautions into your operation manual to ensure safe operation of your product by users. 

1-1 

Содержание LTPD245D













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды