-
24
-
Operation 2: SWDIP switch setting
(1) When the message shown at the following is printed, set the bits from the most
significant bit (SWDIP*-8) to the least significant bit (SWDIP*-1).
Input 8 bits.
1: Feed SW / 0: Power SW
To set 1: Press the FEED switch.
To set 0: Press the POWER switch.
For example, to set 10101110, press the switches in the following sequence:
FEED, POWER, FEED, POWER, FEED, FEED, FEED, POWER.
(2) When the switches are pressed eight times (for eight bits), the following
message is printed.
DIP SW-1=********
Save Setting?
Yes: Feed SW / No: Power SW
When the FEED switch is pressed, the message shown at the following is
printed, and the setting is saved.
DIP SW-1=******** Saved.
When pressing the POWER switch instead of the FEED switch, the message
shown at the following is printed and the setting is not changed.
DIP SW-1 Not Changed.
After this operation, the function setting mode goes to the next SWDIP switch
(operation 1).
After setting SWDIP switch 4, the printer exits function setting mode (operation
3).
HINT
"********" in the message indicates the setting of SWDIP switch. The
leftmost bit is the most significant bit (SWDIP*-8) and the rightmost bit is
the least significant bit (SWDIP*-1).
