Seiko AUTO CALENDAR J, Инструкция по эксплуатации

Страница: 14 / 22

Second click (Time setting)
First click (Free): Calendar checking
Normal position (Free)
＊Do not leave the crown at the first or second click when you use the watch, as this will
shorten the battery life.
Names of the parts
Crown
Day
Minute hand
Hour hand
Second hand
Button
50 51
Check the type of the crown of your watch
Go to
"Instructions
for use"
The crown
turns.
The crown
does not turn.
Turn the
crown
clockwise.
Unscrew the crown by turning
it counterclockwise.
To set the watch
Unscrew.
Screw up.
The crown of your watch
is *the screw lock type.
※This type of crown can be screwed into the watch body to avoid being pulled out
by mistake.
○ After completing all settings of the watch, screw the crown in again by turning
it clockwise while pressing it.
○ If the crown turns out to be too stiff to be screwed up, turn the crown
counterclockwise once and then give another try.
○ Do not screw it in by force as it may damage the slots of the crown.
How to set the time
● The calendar data, namely, the current year, month and date, are pre-recorded at the
factory, and it is not necessary to adjust the calendar. In case the calendar indication is
not correct, check the calendar referring to "How to adjust the calendar".
● The date changes correspondingly with the time. It changes once in 24 hours or can be
changed manually by turning the hour hand two full circles. The date advances or returns
by one day by advancing or turning back the hour hand past the 12 o'clock marker,
respectively.
・The date changes between 11:00 p.m. and 1:00 a.m. while the watch is in operation.
・When the date is changed manually by turning the crown, it changes between 9:00 p.m.
and 3:00 a.m. Once the desired date is set, however, the date changes properly between
11:30 p.m. and 12:30 a.m. while the watch is in operation.
52
○ The telephone time signal service (Tel. 117) is convenient for setting the time.
Note
For models with a screw lock type crown, always screw the crown up again after setting the time
Pull out the crown
to the second click
when the second
hand is at the
12 o'clock position.
Turn the crown
to set the time.
In order to set the time
accurately, turn the minute
hand 4 to 5 minutes ahead
and then return it to the
correct time.
Push the crown
back in to its
normal position
simultaneously
with a time signal.
53