After sales service
●
Notes on guarantee and repair
• Contact the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE CENTER
for repair or overhaul.
• Within the guarantee period, present the certificate of guarantee to receive repair services.
• Guarantee coverage is provided in the certificate of guarantee.
Read carefully and retain it.
• For repair services after the guarantee period has expired, if the functions of the watch can be restored
by repair work, we will undertake repair services upon request and payment.
●
Replacement with functional parts
• Please keep in mind that if original parts are not available, they may be replaced with substitutes whose
outward appearance may differ from the originals.
EN
76
7
TO PRESERVE THE QUALITY OF YOUR
WATCH
●
Inspection and adjustment by disassembly and cleaning (Overhaul)
• Periodic inspection and adjustment by disassembly and cleaning (overhaul) is recommended
approximately once every 3 to 4 years in order to maintain optimal performance of the watch for a long
time. According to use conditions, the oil retaining condition of your watch mechanical parts may
deteriorate, abrasion of the parts may occur due to contamination of oil, which may ultimately lead the
watch itself to stop.
As the parts such as gasket may deteriorate, water-resistant performance may be impaired due to
intrusion of perspiration and moisture.
Please contact the retailer from whom the watch was purchased for inspection and adjustment by
disassembly and cleaning (overhaul). For replacement of parts, please specify “SEIKO GENUINE
PARTS.” When asking for inspection and adjustment by disassembly and cleaning (overhaul), make
sure that the gasket and push pin are also replaced with new ones.
• When your watch is inspected and adjusted by disassembly and cleaning (overhauled), the movement
of your watch may be replaced.
EN
77
7
TO PRESERVE THE QUALITY OF YOUR
WATCH
How to conduct manual reception (Receive a radio
signal manually)
The antenna is embedded at the
9 o’clock position of the watch.
Turning the antenna toward the
outside of a window helps
improve radio signal reception.
2
Reset the stopwatch and check the selected time zone.
* If the stopwatch hands are not reset to the 0-position, it is not possible to set the time zone (the small seconds hand does
not stop).
“How to Reset the Stopwatch”
→
P.40
“How to select the time zone (How to display the local time around the world)”
→
P.32
1
Place the watch.
Place the watch where it can easily receive a radio signal.
“To improve radio signal reception”
→
P.25
“Environments in which it is difficult to receive a radio
signal”
→
P.26
* The watch cannot receive a radio signal outside the radio
signal reception range. “Radio signal reception range
indication”
→
P.20
EN
78
8
TROUBLESHOOTING
Button B
Press for
3
seconds
0-second
position
3
Continue to press and hold Button B for 3
seconds, and then release it when the small
seconds hand moves to the 0-second
position.
Reception starts after the small seconds hand moves and
stops at the 0-second position.
* If the small seconds hand does not stop at the 0-second
position, manual reception cannot be conducted. Re-
attempt the operation from procedure 2.
EN
79
8
TROUBLESHOOTING
