3
Pull the pin out of an adjustment hole of the
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
hole.
Pin
Adjustment hole
Pin
Adjustment hole
4
Fasten the flap.
EN
68
7
TO PRESERVE THE QUALITY OF YOUR
WATCH
How to use an adjustable three-fold clasp (Pointed
tip diving type)
The rubber bands and some leather bands are provided with an adjustable three-fold clasp
(Pointed tip diving type) of the type where the pointed tip of the band dives downward as shown
in the figure.
If the clasp of the watch you purchased is as follows, please refer to the following instructions.
EN
69
7
TO PRESERVE THE QUALITY OF YOUR
WATCH
●
How to wear or take off the watch
Buckle
Push button
Band
1. Open the clasp and pull upward by
pressing the push buttons on both sides of
the buckle.
2. Fasten the clasp by pressing the frame of
the buckle.
EN
70
7
TO PRESERVE THE QUALITY OF YOUR
WATCH
●
How to adjust the length of the band
Buckle
Push button
Band
Pin
Pin
Adjustment hole
1. Open the band clasp by pushing the
buttons on both sides of the clasp.
2. Pull the pins out of the adjustment holes at
both locations.
EN
71
7
TO PRESERVE THE QUALITY OF YOUR
WATCH
