49
Once the password is set, you are requested to enter the current password before changing
any setting.
Example: The current password is "1234" and go into the "FUNCTION" setting mode.
42
45
How to Change Settings When the Password Is Set
1
Push the FUNCTION button for 3
seconds. Then, "9999" will be
indicated on the display and the first
two digits flash.
The flashing number can be changed.
2
In case of the example, push
CHANGE button to set at "12" and
then push the SET button. At that
moment, the flashing will change to
the last two digits.
3
In case of the example, push the
CHANGE button to set at "34" and
then push the SET button. At that
moment, the " " mark is located under
"CARD TYPE".
4
Select desired setting mode by
pushing the FUNCTION button. Then
make any changes as explained.
Note: If you want to change any
"DATE/TIME" settings, push the
DATE/TIME button in Step 1 instead.
After entering the Password, the display
will be as shown in the left figure and
then make any changes as explained.
HOURS
Enter the first two digits.
Enter the last two digits.
CARD
TYPE
CHANGE
FUNCTION
SET
DATE/TIME
CHANGE
FUNCTION
SET
DATE/TIME
CHANGE
FUNCTION
SET
DATE/TIME
CHANGE
FUNCTION
SET
DATE/TIME
CHANGE
FUNCTION
SET
DATE/TIME
Содержание QR-395
Страница 1: ...QUARTZ TIME RECORDER USER S MANUAL 1 ...
Страница 2: ...2 ...
Страница 63: ...63 ...
Страница 64: ...Q0285 61200 ALL RIGHTS RESERVED 2012 64 ...
