(2) Element width: DC4 DC4 E
Format:
ASCII
DC4
DC4
E
n1 n2
Hex
14
14
45
n1 n2
Decimal
20
20
69
n1 n2
Function:
Specifies the n2/120” or n2/180” width of the element n1.
(1
≤
n2
≤
127)
120” or 180” is specified with the DC4 DC4 D command.
n1 = 0: Narrow bar
3: Wide space
1: Wide bar
4: Inter-character gap
2: Narrow space
The narrow bar width or narrow space is used as the element width for
Code 93, Code 128, EAN-8, EAN-13, UPC-A, and UPC-E.
One element width of bar 1: Narrow bar width
One element width of space 1: Narrow space width
The midium bar or wide space width is used as the midium element
width for Code 11. The wide element width is (wide bar width x 2 -
narrow bar width).
This setting is not valid for Postnet.
The inter-character gap means the space between each set of codes of a
bar code which begins with a bar and ends with a bar.
(3) Bar code height: DC4 DC4 H
Format: ASCII
DC4
DC4
H
n
Hex
14
14
48
n
Decimal
20
20
72
n
Function: Sets the bar code height to n/12”. (0
≤
n
≤
120)
The currently set line feed pitch serves as the bar code height when
is set to 0. This setting is not valid for Postnet.
(4) Setting HRI on and off: DC4 DC4 I
Format: ASCII
DC4
DC4
I
n
Hex
14
14
49
n
Decimal
20
20
73
n
Function: Specifies whether or not to print an HRI. Also specifies the
HRI printing position if an HRI is to be printed.
n = 0: HRI not printed.
1: HRI printed below the bar code symbol.
2: HRI printed above the bar code symbol.
No HRI printed for Postnet or Element regardless of this setting.
71
9. Bar code and enlarged character
