vii
Handling Precautions
Power Supply
1. Install the dryer near an easily accessible electrical outlet.
2. Do not provide power to the dryer through the same power line
as for noise-generating devices, such as a motor.
3. The power supply voltage must be 230 VAC.
4. Connect the power cable to an electrical outlet. Do not plug
several devices into a single electrical outlet.
Dryer
1. Do not place anything on top of the dryer. Do not rest your
elbows on the dryer.
2. Do not clean the surface of the cover with benzene or paint
thinner. The coating may come off or deteriorate.
Wipe the cover clean with a soft cloth. If the cover is very dirty,
use a cloth moistened with a neutral detergent.
3. This dryer is prepared only as the media (ink) drying device for
the IP-6600 printer.
Do not use any other dvices or any other pursoses.
4. Remove the protection sheet attached on the surface of the dryer
before use.
Limitations
1. When the dryer is used, the tension winding cannot be used.
2. When the dryer is used, the media saving mode function cannot
be used.
