8
Section 4 Installing / Uninstalling Media
This Section explains how to install or uninstall media when the dryer is used.
4-1 Installing Media
When the dryer is used, install media according to the following procedures
after attaching the fan vacuum positioning bar to the printer.
For procedures before attaching the fan vacuum positioning bar, see
IP-6600
User’s Guide, Section 2 Replacing Media
■
.
When using the direct media release function
1.
Loosen the green screws at the right and left bottom of the dryer and
open the media outlet.
Screw
Media outlet
Screw
NOTE
-
When the direct media release function is not desired (the winding
unit is used), always close the media outlet to increase drying
efficiency.
